A federal rule fixes the yellow octane label on every gasoline dispenser in the country: where it goes, what number it carries, how big it is, what color it is, and how long the paperwork behind it stays in the file. The rule is 16 CFR Part 306, the Federal Trade Commission’s rule on automotive fuel ratings, certification and posting, and it reaches every station that sells gasoline or another covered automotive fuel to the public.
The article reads the rule as its text stands on the Legal Information Institute’s copy of the Electronic Code of Federal Regulations on 28 October 2026, section by section. The Dispenser Label Walk, a one-page checklist, turns it into a round of the forecourt. It covers the federal rule only. Nothing here is legal advice, and a question about a specific dispenser belongs with the FTC or an attorney.
One rule, every station: who is covered and what a breach costs
The rule opens with its reach and then names its penalty. 16 CFR 306.1 covers the certification and posting of automotive fuel ratings in or affecting commerce as the Federal Trade Commission Act defines commerce, and it states: “It applies to persons, partnerships, and corporations. If you are covered by this regulation, breaking any of its rules is an unfair or deceptive act or practice under section 5 of that Act. You can be fined up to $10,000 (plus an adjustment for inflation, under § 1.98 of this chapter) each time you break a rule.” The $10,000 matches the base in section 5(m)(1)(A) of the FTC Act, the penalty provision for knowing violations of FTC rules, which the article reads as the line that applies; 16 CFR 1.98 sets that line at $53,088 for penalties assessed after January 17, 2025, and is revised from time to time.
16 CFR 306.2 sets the coverage in one line: “You are covered by this rule if you are a refiner, importer, producer, distributor, or retailer of automotive fuel.” The definitions in 16 CFR 306.0 put a station in the last of those classes: “Retailer means any person who markets automotive fuel to the general public for ultimate consumption.” The same definitions leave out low-blend diesel: biodiesel and biomass-based diesel blends at or under 5 percent that meet the ASTM D975 diesel specification “are not automotive fuels covered by the requirements of this part.”
The number on the label: what an octane rating is
The figure on the yellow label is a defined term. 16 CFR 306.0 states: “Octane rating means the rating of the anti-knock characteristics of a grade or type of gasoline as determined by dividing by 2 the sum of the research octane number plus the motor octane number.” The label’s line reading (R + M)/2 METHOD is that formula. The same section separates the higher ethanol blends from gasoline: “Ethanol flex fuels means a mixture of gasoline and ethanol containing more than 10 percent but not greater than 83 percent ethanol by volume.”
The station does not have to measure the number. 16 CFR 306.5 puts the testing duty upstream: “If you are a refiner, importer, or producer, you must determine the automotive fuel rating of all automotive fuel before you transfer it. You can do that yourself or through a testing lab.” The number reaches the station on paper, with the fuel.
The chain of custody: how the number reaches your tank
Every transfer of fuel that is not a sale to a consumer carries a certification of its rating. 16 CFR 306.6, under the rule’s heading for refiners, importers and producers, states their duty: “In each transfer you make to anyone who is not a consumer, you must certify the automotive fuel rating of the automotive fuel consistent with your determination. You can do this in either of two ways:”
The first way is a paper with the load: “Include a delivery ticket or other paper with each transfer of automotive fuel. It may be an invoice, bill of lading, bill of sale, terminal ticket, delivery ticket, or any other written proof of transfer. It must contain at least these four items:” The four, in the regulation’s order, are “(1) Your name; (2) The name of the person to whom the automotive fuel is transferred; (3) The date of the transfer; (4) The automotive fuel rating. Octane rating numbers may be rounded off to a whole or half number equal to or less than the number determined by you.”
The second way is a standing letter of certification: “Give the person a letter or other written statement.” The same paragraph states what the letter contains, how long it lasts and when a new one is due.
The distributor who delivers to the station carries the duty one link down. 16 CFR 306.8 states: “If you are a distributor, you must certify the automotive fuel rating of the automotive fuel in each transfer you make to anyone who is not a consumer.” A station that takes fuel from a common carrier has a receiving duty of its own. 16 CFR 306.10 states: “When you receive automotive fuel from a common carrier, you also must receive from the common carrier a certification of the automotive fuel rating of the automotive fuel, either by letter or on the delivery ticket or other paper.” The paper that arrives with each drop, or the letter on file from the supplier, is the basis for the number on the dispenser, unless the station posts its own determination under § 306.5.
The posting duty: one label on each face of each dispenser
The retailer’s central duty is in 16 CFR 306.10: “If you are a retailer, you must post the automotive fuel rating of all automotive fuel you sell to consumers. You must do this by putting at least one label on each face of each dispenser through which you sell automotive fuel. If you are selling two or more kinds of automotive fuel with different automotive fuel ratings from a single dispenser, you must put separate labels for each kind of automotive fuel on each face of the dispenser. Provided, however, that you do not need to post the automotive fuel rating of a mixture of gasoline and ethanol containing more than 10 but not more than 15 percent ethanol if the face of the dispenser is labeled in accordance with 40 CFR 1090.1510.”
Each face of each dispenser needs a label for each grade sold from it, so a two-sided dispenser selling regular, mid-grade and premium needs six.
The proviso covers E15. A gasoline and ethanol mixture at more than 10 and up to 15 percent ethanol needs no octane label on a face that already carries the Environmental Protection Agency’s E15 label. 40 CFR 1090.1510 states: “Any retailer or WPC dispensing E15 must apply a label to the fuel dispenser as follows:” and on position: “Position the label to clearly identify which control the consumer will use to select E15. If the dispenser is set up to dispense E15 without the consumer taking action to select the fuel, position the label on a vertical surface in a prominent place, approximately at eye level.” The EPA section fixes that label’s wording and colors in its own figure. The proviso relieves the E15 product only; any other grade sold from that face still needs its octane label.
Where the label goes, and what happens when it fades
Placement has its own paragraph in 16 CFR 306.10: “The label, or labels, must be placed conspicuously on the dispenser so as to be in full view of consumers and as near as reasonably practical to the price per unit of the automotive fuel.” A label behind the nozzle boot or on a side panel may fail the first half of that sentence if it is not in full view, and the price display on each face is the anchor for the second half. A station that cannot meet those placement terms may petition: “You may petition for an exemption from the placement requirements. You must state the reasons that you want the exemption.”
A label that has faded in the sun has stopped doing its job, and the rule says so: “You must maintain and replace labels as needed to make sure consumers can easily see and read them.” A label lost overnight has its own sentence: “If the labels you have are destroyed or are unusable or unreadable for some unexpected reason, you can satisfy the law by posting a temporary label as much like the required label as possible. You must still get and post the required label without delay.”
Which number you post: the blending rule and the rounding rule
The posted number is tied to the certified number. 16 CFR 306.10 states: “In the case of gasoline, if you do not blend the gasoline with other gasoline, you must post the octane rating of the gasoline consistent with the octane rating certified to you. If you blend the gasoline with other gasoline, you must post consistent with your determination of the average, weighted by volume, of the octane ratings certified to you for each gasoline in the blend, or consistent with the lowest octane rating certified to you for any gasoline in the blend. Whether you blend gasoline or not, you may choose to post the octane rating of the gasoline consistent with your determination of the octane rating according to the method in § 306.5. In cases involving gasoline, the octane rating must be shown as a whole or half number equal to or less than the number certified to you or determined by you.”
A station whose dispensers blend a mid-grade from regular and premium may post one of three figures for the blend: the volume-weighted average of the two certified ratings, the lower of the two, or its own determination of the octane rating by the method in § 306.5. The rounding rule then sets a ceiling on every posted figure: a certified 87.5 may be posted as any whole or half number no higher than 87.5, so 87.5, 87 and 86.5 are all lawful, and a certified 87.4 may be posted at no more than 87.
What a gasoline label looks like
The label’s design is fixed in 16 CFR 306.12, which opens: “All labels must meet the following specifications:” For gasoline labels the layout paragraph states: “The label is 3 inches (7.62 cm) wide × 2 1/2 inches (6.35 cm) long.” The typeface is Helvetica Black or an equivalent, “except for the octane rating number on octane labels, which is in Franklin gothic type.”
The type sizes are set line by line. The line reading Minimum Octane Rating “is set in 12 point Helvetica Bold, all capitals”, the line reading (R + M)/2 METHOD “is set in 10 point Helvetica Bold, all capitals”, and “The octane number is set in 96 point Franklin gothic condensed” with a set space between the digits. Color is fixed too: “The basic color on all octane labels is process yellow. All type is process black. All borders are process black. All colors must be non-fade.”
The contents paragraph closes the door on additions: “The proper octane rating for each gasoline must be shown. The proper automotive fuel rating for each alternative liquid automotive fuel must be shown. No marks or information other than that called for by this rule may appear on the labels.” The label also has to survive the forecourt: “All labels must be capable of withstanding extremes of weather conditions for a period of at least one year. They must be resistant to automotive fuel, oil, grease, solvents, detergents, and water.”
For a station that buys its labels from a supplier, the specification is the test of a supplier’s label: a logo or a price printed on it breaks the contents paragraph.
The rule reaches past gasoline. Paragraph (j) of 16 CFR 306.0 defines four ratings: one for gasoline, one for alternative liquid fuels such as methanol and liquefied petroleum gas, one for biodiesel and biomass-based diesel and their blends over 5 percent, and one for ethanol flex fuels. The labels for those fuels differ in color. 16 CFR 306.12 states for alternative liquid fuels other than biodiesel: “The background color on all the labels is Orange: PMS 1495 or its equivalent.” For biodiesel and biodiesel blends: “The background color on all the labels is Blue: PMS 277 or its equivalent.”
The paper trail: one year, at the outlet or nearby
The posting duty comes with a filing duty. 16 CFR 306.11 states: “You must keep for one year any delivery tickets or letters of certification on which you based your posting of automotive fuel ratings. You also must keep for one year records of any automotive fuel rating determinations you made according to § 306.5. These records may be kept at the retail outlet or at another, reasonably close location. They must be available for inspection by Federal Trade Commission and Environmental Protection Agency staff members or by persons authorized by FTC or EPA.”
The Dispenser Label Walk: a one-page checklist
The Dispenser Label Walk is a round of the forecourt, dispenser by dispenser, with a stop at the office at the end.
Step 1. Count faces and grades. For each dispenser, write the dispenser number, the number of faces, and the grades sold from each face. Each grade on each face needs one label.
Step 2. Check placement. On each face, the label for each grade sits in full view and as near as reasonably practical to that grade’s price per unit.
Step 3. Check the number. Against the latest delivery ticket or letter of certification: the certified number, or a whole or half number no higher than it; for a grade blended at the dispenser, the volume-weighted average or the lowest certified rating; for any gasoline grade, the station’s own § 306.5 determination instead, with its record on file.
Step 4. Check condition. Each label is readable from where a customer stands. A faded label is replaced; one lost for some unexpected reason may carry a temporary label until the specified label is posted without delay.
Step 5. Check the label itself. Process yellow, black type, the two text lines and the octane number, and nothing else.
Step 6. Check E15 and alternative fuels. An E15 face carries the EPA label at the control that selects E15 (at eye level if no selection is needed), and its other grades keep their octane labels; an alternative fuel or biodiesel dispenser carries its orange or blue label.
Step 7. Check the file. One year of the delivery tickets or letters of certification behind the posted ratings, and of records of any § 306.5 determination, at the station or a nearby office.
| Check | Rule | Where to look |
|---|---|---|
| One label per grade per face | 16 CFR 306.10(a) | Each dispenser face |
| In full view, as near as reasonably practical to the price per unit | 16 CFR 306.10(b) | Each dispenser face |
| Posted number at or below the certified number or the station’s own § 306.5 determination | 16 CFR 306.10(c) | Delivery ticket or § 306.5 record against label |
| Readable; temporary label when lost | 16 CFR 306.10(e) | Each label |
| Size, type, process yellow, nothing else printed | 16 CFR 306.12 | Each label |
| E15 label in place | 40 CFR 1090.1510 | E15 faces |
| Tickets, letters and § 306.5 records kept one year | 16 CFR 306.11 | Station or nearby office |
Where state law fits
The federal rule states its own relationship to state law. 16 CFR 306.4 quotes section 204 of the Petroleum Marketing Practices Act, which it describes as “the law that directs the FTC to enact this rule.” Subsection (a) of that section reads: “To the extent that any provision of this title applies to any act or omission, no State or any political subdivision thereof may adopt or continue in effect, except as provided in subsection (b), any provision of law or regulation with respect to such act or omission, unless such provision of such law or regulation is the same as the applicable provision of this title.” Subsection (b) reads: “A State or political subdivision thereof may provide for any investigative or enforcement action, remedy, or penalty (including procedural actions necessary to carry out such investigative or enforcement actions, remedies, or penalties) with respect to any provision of law or regulation permitted by subsection (a).”
Read together, the two subsections mean a state cannot keep a different octane posting rule of its own for the acts the federal rule covers, and a state can enforce the same rule with its own inspectors and penalties. Meter accuracy and fuel quality are outside this rule, and the article does not summarize any state or other federal rule on them.
Where the POS fits, and where it does not
The octane label is a sign on the dispenser, and the register neither posts it nor records it; the two meet only in the records of what each grade sold. NRS’s guide to the operational advantages of a petro-specific POS states: “The single most time-consuming back-office task at any fuel-selling location is shift reconciliation, matching what the pumps dispensed against what the register collected.” Its guide to fuel-pump-to-register reconciliation describes the device that holds the per-grade figures: “The fuel dispenser controller (sometimes called a site controller or forecourt controller) tracks pump activity, tank levels, and per-grade volume.” For the wider question of running fuel and store on one system, see NRS’s guide to a gas station convenience store POS system.
What this article leaves out. It gives no state rules, no label artwork and no ASTM test method. It does not answer whether petroleum diesel with no biodiesel at all needs a label, because the sections quoted define no rating for it and the exclusion speaks of blends. The rule was read on the Legal Information Institute’s copy of the Electronic Code of Federal Regulations on 28 October 2026, and it can be amended.
Frequently asked questions
How many octane labels does a two-sided dispenser selling three grades need?
Six. The rule states: “If you are selling two or more kinds of automotive fuel with different automotive fuel ratings from a single dispenser, you must put separate labels for each kind of automotive fuel on each face of the dispenser.”
My delivery ticket says 87.5. Can I post 87?
Yes. For gasoline “the octane rating must be shown as a whole or half number equal to or less than the number certified to you or determined by you.” Posting 88 would break the same sentence.
A label peeled off pump 4 overnight. What do I do today?
Post a temporary label and order the specified one. The rule states: “you can satisfy the law by posting a temporary label as much like the required label as possible. You must still get and post the required label without delay.”
Do I have to test the octane myself?
No. The refiner, importer or producer “must determine the automotive fuel rating of all automotive fuel before you transfer it.” The station may post the number certified to it, or its own determination by the § 306.5 method.
How long do I keep the delivery tickets?
One year. The rule states: “You must keep for one year any delivery tickets or letters of certification on which you based your posting of automotive fuel ratings.” They may be kept “at the retail outlet or at another, reasonably close location.”
Key takeaways
Every station that sells gasoline to the public is a retailer under 16 CFR Part 306, and each breach of the rule can draw a fine.
The octane rating is (R + M)/2, determined upstream (a station may also determine it by the § 306.5 method), and it reaches the station on a delivery ticket with four required items or a letter of certification.
One label on each face of each dispenser, and a separate label for each grade sold from that face.
The label sits in full view and as near as reasonably practical to the price per unit; an exemption from those placement terms takes a petition to the FTC.
Post a whole or half number no higher than the certified number. A blended grade may carry the volume-weighted average or the lowest of the certified ratings, and any gasoline grade may carry the station’s own § 306.5 determination.
Faded labels are replaced; a label lost for some unexpected reason may get a temporary label and the specified label without delay.
The gasoline label is 3 inches by 2 1/2 inches, process yellow, black type, and nothing else printed on it. Alternative fuel labels are orange and biodiesel labels are blue.
Keep delivery tickets, letters of certification and § 306.5 records for one year, at the station or a nearby office, for FTC or EPA inspection.
States cannot keep a different octane posting rule for the acts this rule covers, but they can enforce this one; meter accuracy and fuel quality fall outside this rule.
